All MIBs › CISCO-CALL-TRACKER-MIB › cctActivePhysicalLayerReadyTime
cctActivePhysicalLayerReadyTime
Module: CISCO-CALL-TRACKER-MIB
OID (symbolic): CISCO-CALL-TRACKER-MIB::cctActivePhysicalLayerReadyTime
OID (numeric): 1.3.6.1.4.1.9.9.163.1.2.3.1.5
Node type: OBJECT-TYPE
Type: TimeStamp
Access: read-only
Description: Value of sysUpTime when the physical layer for the call achieved a steady state and the call is ready for higher protocol layers to begin.
In the case of modem calls, the physical layer for the call achieves a steady state when the data rates, modulations, and error correcting protocols have been negotiated between the originating and answering modems.
This is primarily intended for calls which connect to a processing resource identified by cctActiveResourceSlot and cctActiveResourcePort. It also applies to digital calls using adaptive rate technologies such as V.110 and V.120.
What is cctActivePhysicalLayerReadyTime?
Read-only timestamp (sysUpTime value) marking when the call's physical layer reached a steady state and became ready for higher protocol layers, e.g. once modem data rates stabilized.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.163.1.2.3.1.5 snmpwalk -v2c -c public <target> CISCO-CALL-TRACKER-MIB::cctActivePhysicalLayerReadyTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.163.1.2.3.1.5.1 snmpget -v2c -c public <target> CISCO-CALL-TRACKER-MIB::cctActivePhysicalLayerReadyTime.1
Start monitoring Cisco Network Access Server (NAS) equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CALL-TRACKER-MIB::cctActivePhysicalLayerReadyTime OID value, configure state conditions and alerts, and monitor any Cisco Network Access Server (NAS) equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.163 | ciscoCallTrackerMIB | CISCO-CALL-TRACKER-MIB |
| 1.3.6.1.4.1.9.9.163.1 | cctMIBObjects | CISCO-CALL-TRACKER-MIB |
| 1.3.6.1.4.1.9.9.163.1.2 | cctActive | CISCO-CALL-TRACKER-MIB |
| 1.3.6.1.4.1.9.9.163.1.2.3 | cctActiveTable | CISCO-CALL-TRACKER-MIB |
| 1.3.6.1.4.1.9.9.163.1.2.3.1 | cctActiveEntry | CISCO-CALL-TRACKER-MIB |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.5 | cctActivePhysicalLayerReadyTime | CISCO-CALL-TRACKER-MIB |