All MIBs › CISCO-CABLE-SPECTRUM-MIB › ccsFlapPowerAdjustments
ccsFlapPowerAdjustments
Module: CISCO-CABLE-SPECTRUM-MIB
OID (symbolic): CISCO-CABLE-SPECTRUM-MIB::ccsFlapPowerAdjustments
OID (numeric): 1.3.6.1.4.1.9.9.114.1.1.5.1.8
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of times the Cable Modem upstream transmit power is adjusted during station maintenance. When the adjustment is greater than the power adjustment threshold the counter will be incremented. The power adjustment threshold is chosen in an implementation-dependent manner.
The Flap Count (ccsFlapTotal) will be incremented when this counter is incremented.
If ccsFlapTotal is high, ccsFlapPowerAdjustments is high but the Hits and Misses are low and ccsFlapInsertionFails are low then the flapping is probably caused by an improper transmit power level setting at the modem end.
This count can indicate: Amplifier degradation, Poor connections, or Wind, moisture, or temperature sensitivity.
Discontinuites in the value of this counter can occur if this entry is removed from the table and then re-added, and are indicated by a change in the value of ccsFlapCreateTime.
What is ccsFlapPowerAdjustments?
Read-only counter tracking how many times the cable modem's upstream transmit power was adjusted by more than an implementation-defined threshold during station maintenance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.5.1.8 snmpwalk -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsFlapPowerAdjustments
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.5.1.8.1 snmpget -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsFlapPowerAdjustments.1
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CABLE-SPECTRUM-MIB::ccsFlapPowerAdjustments OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.114 | ciscoCableSpectrumMIB | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1 | ciscoCableSpectrumMIBObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1 | ccsFlapObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.5 | ccsFlapTable | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.5.1 | ccsFlapEntry | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.5.1.8 | ccsFlapPowerAdjustments | CISCO-CABLE-SPECTRUM-MIB |