All MIBs › CISCO-CABLE-SPECTRUM-MIB › ccsFlapMisses
ccsFlapMisses
Module: CISCO-CABLE-SPECTRUM-MIB
OID (symbolic): CISCO-CABLE-SPECTRUM-MIB::ccsFlapMisses
OID (numeric): 1.3.6.1.4.1.9.9.114.1.1.5.1.6
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of times the CMTS misses the Ranging request from the Cable Modem.
The CMTS issues a Station Maintenance packet every 10 seconds and waits for a Ranging request from the Cable Modem. If the CMTS misses a Ranging request within 25 msec then the Misses count will be incremented.
If ccsFlapTotal is high, Hits and Misses are high but ccsFlapPowerAdjustments and ccsFlapInsertionFails are low then the flapping is probably caused by the modem going up and down.
Miss counts can indicate: Intermittent upstream, Laser clipping, or Noise bursts.
Laser clipping can happen if the signal power is too high when the upstream electrical signal is converted to an optical signal. When it happens the more input produces less output, until finally there is no more increase in output. This phenomena is called laser clipping.
Discontinuites in the value of this counter can occur if this entry is removed from the table and then re-added, and are indicated by a change in the value of ccsFlapCreateTime.
What is ccsFlapMisses?
Read-only counter of how many times the CMTS failed to receive an expected ranging request from the cable modem within the station maintenance window, indicating possible connectivity issues.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.5.1.6 snmpwalk -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsFlapMisses
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.5.1.6.1 snmpget -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsFlapMisses.1
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CABLE-SPECTRUM-MIB::ccsFlapMisses OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.114 | ciscoCableSpectrumMIB | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1 | ciscoCableSpectrumMIBObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1 | ccsFlapObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.5 | ccsFlapTable | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.5.1 | ccsFlapEntry | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.5.1.6 | ccsFlapMisses | CISCO-CABLE-SPECTRUM-MIB |