CISCO-CABLE-SPECTRUM-MIB :: ccsFlapHitNum

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-CABLE-SPECTRUM-MIBccsFlapHitNum

ccsFlapHitNum

Module: CISCO-CABLE-SPECTRUM-MIB

OID (symbolic): CISCO-CABLE-SPECTRUM-MIB::ccsFlapHitNum

OID (numeric): 1.3.6.1.4.1.9.9.114.1.1.5.1.14

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The number of times the CMTS receives the Ranging request from the Cable Modem.

The CMTS issues a Station Maintenance transmit opportunity at a typical rate of once every 10 seconds and waits for a Ranging request from the Cable Modem. If the CMTS receives a Ranging request then the Hit number will be increased by 1

If the FlapTotal object is high, both Hit and Miss objects are high, and other statistical objects are relatively low then the flapping is probably caused by the modem going up and down. The Hit and Miss objects keep-alive polling statistics. The Hit object should be much greater than the Misses count.

This object is going to replace the object ccsFlapHits and the value of this object can be reset to zero if this entry is removed from the table and then re-added, or if an user resets all the statistical objects for this entry. The value of the object ccsFlapLastResetTime indicates the last reset time.

What is ccsFlapHitNum?

Read-only counter (variant of ccsFlapHits) of successful ranging request receptions from the cable modem during station maintenance polling.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.5.1.14
snmpwalk -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsFlapHitNum

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.5.1.14.1
snmpget -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsFlapHitNum.1

Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CABLE-SPECTRUM-MIB::ccsFlapHitNum OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.114ciscoCableSpectrumMIBCISCO-CABLE-SPECTRUM-MIB
1.3.6.1.4.1.9.9.114.1ciscoCableSpectrumMIBObjectsCISCO-CABLE-SPECTRUM-MIB
1.3.6.1.4.1.9.9.114.1.1ccsFlapObjectsCISCO-CABLE-SPECTRUM-MIB
1.3.6.1.4.1.9.9.114.1.1.5ccsFlapTableCISCO-CABLE-SPECTRUM-MIB
1.3.6.1.4.1.9.9.114.1.1.5.1ccsFlapEntryCISCO-CABLE-SPECTRUM-MIB
1.3.6.1.4.1.9.9.114.1.1.5.1.14ccsFlapHitNumCISCO-CABLE-SPECTRUM-MIB