All MIBs › CISCO-CABLE-SPECTRUM-MIB › ccsCmFlapPowerAdjustmentNum
ccsCmFlapPowerAdjustmentNum
Module: CISCO-CABLE-SPECTRUM-MIB
OID (symbolic): CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapPowerAdjustmentNum
OID (numeric): 1.3.6.1.4.1.9.9.114.1.1.11.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of times the Cable Modem upstream transmit power is adjusted during station maintenance. When the adjustment is greater than the power adjustment threshold the number will be incremented. The power adjustment threshold is chosen in an implementation-dependent manner
The Flap number (ccsCmFlapTotalNum) will be incremented when this object is incremented.
If ccsCmFlapTotalNum is high, ccsCmFlapPowerAdjustmentNum is high but the Hit and Miss are low and ccsCmFlapInsertionFailNum are low then the flapping is probably caused by an improper transmit power level setting at the modem end.
This object can indicate: Amplifier degradation, Poor connections, or Wind, moisture, or temperature sensitivity.
The value of this object can be reset to zero if this entry is removed from the table and then re-added, or if the ccsCmFlapResetNow object was set to true(1). The value of the object ccsCmFlapLastResetTime indicates the last reset time.
What is ccsCmFlapPowerAdjustmentNum?
Read-only counter of how many times this cable modem's upstream transmit power was adjusted beyond the configured threshold during station maintenance, reflecting RF instability for that modem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.11.1.10 snmpwalk -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapPowerAdjustmentNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.11.1.10.1 snmpget -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapPowerAdjustmentNum.1
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapPowerAdjustmentNum OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.114 | ciscoCableSpectrumMIB | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1 | ciscoCableSpectrumMIBObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1 | ccsFlapObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11 | ccsCmFlapTable | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11.1 | ccsCmFlapEntry | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11.1.10 | ccsCmFlapPowerAdjustmentNum | CISCO-CABLE-SPECTRUM-MIB |