All MIBs › CISCO-CABLE-SPECTRUM-MIB › ccsCmFlapInsertionFailNum
ccsCmFlapInsertionFailNum
Module: CISCO-CABLE-SPECTRUM-MIB
OID (symbolic): CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapInsertionFailNum
OID (numeric): 1.3.6.1.4.1.9.9.114.1.1.11.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of times a Cable Modem registered more frequently than expected. Excessive registration is defined as the presence of a time span between two successive registration cycles which is less than a threshold span (ccsFlapInsertionTime).
A Cable Modem may fail the ranging or registration process due to not being able to get an IP address. When the Cable Modem can not finish registration within the insertion time, it retries the process and sends the Initial Maintenance packet again. CMTS will receive the Initial Maintenance packet from the Cable Modem sooner than expected and the Cable Modem is considered a flapping modem.
This object may indicate: Intermittent downstream sync loss, or DHCP or modem registration problems.
The Flap number (ccsCmFlapTotalNum) will be incremented when this object is incremented.
The value of this object can be reset to zero if this entry is removed from the table and then re-added, or if the ccsCmFlapResetNow object was set to true(1). The value of the object ccsCmFlapLastResetTime indicates the last reset time.
What is ccsCmFlapInsertionFailNum?
Read-only counter of how many times a specific cable modem registered more frequently than expected (registration cycles closer together than the insertion-time threshold), a sign of instability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.11.1.6 snmpwalk -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapInsertionFailNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.11.1.6.1 snmpget -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapInsertionFailNum.1
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapInsertionFailNum OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.114 | ciscoCableSpectrumMIB | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1 | ciscoCableSpectrumMIBObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1 | ccsFlapObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11 | ccsCmFlapTable | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11.1 | ccsCmFlapEntry | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11.1.6 | ccsCmFlapInsertionFailNum | CISCO-CABLE-SPECTRUM-MIB |