All MIBs › CISCO-CABLE-SPECTRUM-MIB › ccsCmFlapHitNum
ccsCmFlapHitNum
Module: CISCO-CABLE-SPECTRUM-MIB
OID (symbolic): CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapHitNum
OID (numeric): 1.3.6.1.4.1.9.9.114.1.1.11.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of times the CMTS receives the Ranging request from the Cable Modem.
The CMTS issues a Station Maintenance transmit opportunity at a typical rate of once every 10 seconds and waits for a Ranging request from the Cable Modem. If the CMTS receives a Ranging request then the Hit number will be increased by 1
If the FlapTotal object is high, both Hit and Miss objects are high, and other statistical objects are relatively low then the flapping is probably caused by the modem going up and down. The Hit and Miss objects keep-alive polling statistics. The Hit object should be much greater than the Misses count.
The value of this object can be reset to zero if this entry is removed from the table and then re-added, or if the ccsCmFlapResetNow object was set to true(1). The value of the object ccsCmFlapLastResetTime indicates the last reset time.
What is ccsCmFlapHitNum?
Read-only counter of the number of times the CMTS successfully received a ranging request from this cable modem in response to a station-maintenance transmit opportunity, indicating healthy upstream communication.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.11.1.7 snmpwalk -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapHitNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.114.1.1.11.1.7.1 snmpget -v2c -c public <target> CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapHitNum.1
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CABLE-SPECTRUM-MIB::ccsCmFlapHitNum OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.114 | ciscoCableSpectrumMIB | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1 | ciscoCableSpectrumMIBObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1 | ccsFlapObjects | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11 | ccsCmFlapTable | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11.1 | ccsCmFlapEntry | CISCO-CABLE-SPECTRUM-MIB |
| 1.3.6.1.4.1.9.9.114.1.1.11.1.7 | ccsCmFlapHitNum | CISCO-CABLE-SPECTRUM-MIB |