CISCO-CABLE-QOS-MONITOR-MIB :: ccqmCmtsEnfRuleRowStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-CABLE-QOS-MONITOR-MIB › ccqmCmtsEnfRuleRowStatus

ccqmCmtsEnfRuleRowStatus

Module: CISCO-CABLE-QOS-MONITOR-MIB

OID (symbolic): CISCO-CABLE-QOS-MONITOR-MIB::ccqmCmtsEnfRuleRowStatus

OID (numeric): 1.3.6.1.4.1.9.9.341.1.1.1.1.10

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-create

Description: The object controls and reflects the status of rows in this table. All row status values are supported. The status of the row needs to be changed from active(1) to notInService(2) in cases when any of the enforce rule objects need to be changed. If there is any monitoring associated with this enforce rule ongoing at this time, it as well as all the statistics collected over the sample rate and monitoring duration will be cleared when the row status is changed from active(1) to notInService(2). The monitoring will start again only when the row status is changed to active(1).

What is ccqmCmtsEnfRuleRowStatus?

A read-create RowStatus object used to create, activate, or deactivate rows in the enforcement rule table; the row must be set to notInService before modifying its enforcement parameters.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.341ciscoCableQosMonitorMIBCISCO-CABLE-QOS-MONITOR-MIB
1.3.6.1.4.1.9.9.341.1ciscoCableQosMonitorMIBObjectsCISCO-CABLE-QOS-MONITOR-MIB
1.3.6.1.4.1.9.9.341.1.1ccqmEnforceRuleObjectsCISCO-CABLE-QOS-MONITOR-MIB
1.3.6.1.4.1.9.9.341.1.1.1ccqmCmtsEnforceRuleTableCISCO-CABLE-QOS-MONITOR-MIB
1.3.6.1.4.1.9.9.341.1.1.1.1ccqmCmtsEnforceRuleEntryCISCO-CABLE-QOS-MONITOR-MIB
1.3.6.1.4.1.9.9.341.1.1.1.1.10ccqmCmtsEnfRuleRowStatusCISCO-CABLE-QOS-MONITOR-MIB