All MIBs › CISCO-BSTUN-MIB › bstunRouteBIPDeviceStatus
bstunRouteBIPDeviceStatus
Module: CISCO-BSTUN-MIB
OID (symbolic): CISCO-BSTUN-MIB::bstunRouteBIPDeviceStatus
OID (numeric): 1.3.6.1.4.1.9.9.35.1.4.1.1.18
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: If bstunRouteType is bip then this indicates the OR bit mask status of the mapped bisync device:
if no bits are set, indicates that the bisync device is up and operational. Bit 0, if set, indicates that the bisync device is reporting an operation check error. Bit 2, if set, indicates that the bisync device is reporting a data check error. Bit 3, if set, indicates that the bisync device is reporting an equipment check error. Bit 4, if set, indicates that the bisync device is reporting that intervention is required. Bit 5, if set, indicates that the bisync device is reporting that a command has been rejected. Bit 6, if set, indicates that the bisync device is not responding to polls. Bit 7, if set, indicates that the bisync device is now responding to polls and is operational. Bit 9, if set, indicates that the bisync device is reporting that is no longer busy. Bit 10, if set, indicates that the bisync device is reporting a device unit specify. Bit 11, if set, indicates that the bisync device is reporting a busy condition.
What is bstunRouteBIPDeviceStatus?
This read-only bitmask reports the operational status of the mapped bisync device on a BIP route, where a value of zero indicates the device is up and operational and set bits flag specific problem conditions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.35.1.4.1.1.18 snmpwalk -v2c -c public <target> CISCO-BSTUN-MIB::bstunRouteBIPDeviceStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.35.1.4.1.1.18.1 snmpget -v2c -c public <target> CISCO-BSTUN-MIB::bstunRouteBIPDeviceStatus.1
Start monitoring Cisco routers (legacy SNA/BSC serial tunneling over IP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BSTUN-MIB::bstunRouteBIPDeviceStatus OID value, configure state conditions and alerts, and monitor any Cisco routers (legacy SNA/BSC serial tunneling over IP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.35 | ciscoBstunMIB | CISCO-BSTUN-MIB |
| 1.3.6.1.4.1.9.9.35.1 | bstunObjects | CISCO-BSTUN-MIB |
| 1.3.6.1.4.1.9.9.35.1.4 | bstunRoutes | CISCO-BSTUN-MIB |
| 1.3.6.1.4.1.9.9.35.1.4.1 | bstunRouteTable | CISCO-BSTUN-MIB |
| 1.3.6.1.4.1.9.9.35.1.4.1.1 | bstunRouteEntry | CISCO-BSTUN-MIB |
| 1.3.6.1.4.1.9.9.35.1.4.1.1.18 | bstunRouteBIPDeviceStatus | CISCO-BSTUN-MIB |