All MIBs › CISCO-BOOT-HWDIAGS-MIB › ciscoBootHwDiagsMIBConfigCode
ciscoBootHwDiagsMIBConfigCode
Module: CISCO-BOOT-HWDIAGS-MIB
OID (symbolic): CISCO-BOOT-HWDIAGS-MIB::ciscoBootHwDiagsMIBConfigCode
OID (numeric): 1.3.6.1.4.1.9.9.696.1.3.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object provides additional optional detailed configuration options (sub-tests configurations) for a diagnostics test category. The decoding of this unsigned 32-bit integer is platform-specific and allows for many platform-specific configurations. For the CLI example above, a ciscoBootHwDiagsMIBConfigCode for the FPGA(s) test category will cause all FPGA tests to be disabled, whereas, a ciscoBootHwDiagsMIBConfigCode of 1 will enable FPGA1 test. A ciscoBootHwDiagsMIBConfigCode of 3 will enable FPGA1 AND FPGA2-subtest1, and so forth (since there is only one test for FPGA1, but two tests for FPGA2). Hence the encoding is platform dependent and flexible.
What is ciscoBootHwDiagsMIBConfigCode?
This read-write object holds a platform-specific 32-bit code used to configure detailed sub-test options for a boot-time hardware diagnostics test category.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.696.1.3.1.6 snmpwalk -v2c -c public <target> CISCO-BOOT-HWDIAGS-MIB::ciscoBootHwDiagsMIBConfigCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.696.1.3.1.6.1 snmpget -v2c -c public <target> CISCO-BOOT-HWDIAGS-MIB::ciscoBootHwDiagsMIBConfigCode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.696.1.3.1.6.1 i <value>
Start monitoring Cisco routers/switches (IOS boot-time hardware diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BOOT-HWDIAGS-MIB::ciscoBootHwDiagsMIBConfigCode OID value, configure state conditions and alerts, and monitor any Cisco routers/switches (IOS boot-time hardware diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.696 | ciscoBootHwDiagsMIB | CISCO-BOOT-HWDIAGS-MIB |
| 1.3.6.1.4.1.9.9.696.1 | ciscoBootHwDiagsMIBObjects | CISCO-BOOT-HWDIAGS-MIB |
| 1.3.6.1.4.1.9.9.696.1.3 | ciscoBootHwDiagsMIBTable | CISCO-BOOT-HWDIAGS-MIB |
| 1.3.6.1.4.1.9.9.696.1.3.1 | ciscoBootHwDiagsMIBEntry | CISCO-BOOT-HWDIAGS-MIB |
| 1.3.6.1.4.1.9.9.696.1.3.1.6 | ciscoBootHwDiagsMIBConfigCode | CISCO-BOOT-HWDIAGS-MIB |