All MIBs › CISCO-BGP4-MIB › cbgpPeer2KeepAliveConfigured
cbgpPeer2KeepAliveConfigured
Module: CISCO-BGP4-MIB
OID (symbolic): CISCO-BGP4-MIB::cbgpPeer2KeepAliveConfigured
OID (numeric): 1.3.6.1.4.1.9.9.187.1.2.5.1.24
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Time interval (in seconds) for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in cbgpPeer2HoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by cbgpPeer2KeepAlive. A reasonable maximum value for this timer would be one third of that of cbgpPeer2HoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
What is cbgpPeer2KeepAliveConfigured?
Sets the locally configured KeepAlive timer interval (in seconds) for this peer, which determines KEEPALIVE message frequency relative to the configured Hold Time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.187.1.2.5.1.24 snmpwalk -v2c -c public <target> CISCO-BGP4-MIB::cbgpPeer2KeepAliveConfigured
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.187.1.2.5.1.24.1 snmpget -v2c -c public <target> CISCO-BGP4-MIB::cbgpPeer2KeepAliveConfigured.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.187.1.2.5.1.24.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cbgpPeer2KeepAliveConfigured.1
Start monitoring Cisco routers running BGP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BGP4-MIB::cbgpPeer2KeepAliveConfigured OID value, configure state conditions and alerts, and monitor any Cisco routers running BGP from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.187 | ciscoBgp4MIB | CISCO-BGP4-MIB |
| 1.3.6.1.4.1.9.9.187.1 | ciscoBgp4MIBObjects | CISCO-BGP4-MIB |
| 1.3.6.1.4.1.9.9.187.1.2 | cbgpPeer | CISCO-BGP4-MIB |
| 1.3.6.1.4.1.9.9.187.1.2.5 | cbgpPeer2Table | CISCO-BGP4-MIB |
| 1.3.6.1.4.1.9.9.187.1.2.5.1 | cbgpPeer2Entry | CISCO-BGP4-MIB |
| 1.3.6.1.4.1.9.9.187.1.2.5.1.24 | cbgpPeer2KeepAliveConfigured | CISCO-BGP4-MIB |