All MIBs › CISCO-ATM2-MIB › ciscoatmSigSupportBlliRepeatInd
ciscoatmSigSupportBlliRepeatInd
Module: CISCO-ATM2-MIB
OID (symbolic): CISCO-ATM2-MIB::ciscoatmSigSupportBlliRepeatInd
OID (numeric): 1.3.6.1.4.1.9.10.23.1.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates whether to accept, transfer, and deliver the Broadband Repeat Indicator with two or three instances of the Broadband Low Layer Information Element for low layer information selection from the calling party to the called party. This object shall only be transferred if atmSigSupportLoLyrInfo = 'enabled(1)'. The value of this object can be: - enabled(1) This Information Element is transferred to the called party - disabled(2) This Information Element is NOT transferred to the called party.
What is ciscoatmSigSupportBlliRepeatInd?
This read-write object indicates whether to accept, transfer, and deliver the Broadband Repeat Indicator, allowing two or three instances of the Low Layer Information Element for low-layer information selection, and the description notes this only applies if Low Layer Info support is also enabled. It governs whether the calling party is allowed to offer multiple alternative low-layer-information options for the called party to choose among, rather than a single fixed choice, and since it depends on that other setting being enabled, a caller trying to offer multiple protocol options for negotiation would have that flexibility silently dropped if either setting is disabled. A calling application offering two alternative AAL5 profiles for the called side to pick from would have that choice collapsed to nothing if this repeat-indicator support were disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.23.1.2.1.6 snmpwalk -v2c -c public <target> CISCO-ATM2-MIB::ciscoatmSigSupportBlliRepeatInd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.23.1.2.1.6.1 snmpget -v2c -c public <target> CISCO-ATM2-MIB::ciscoatmSigSupportBlliRepeatInd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.23.1.2.1.6.1 i <value>
Start monitoring Cisco routers/switches with ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM2-MIB::ciscoatmSigSupportBlliRepeatInd OID value, configure state conditions and alerts, and monitor any Cisco routers/switches with ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.23 | ciscoAtm2MIB | CISCO-ATM2-MIB |
| 1.3.6.1.4.1.9.10.23.1 | ciscoatm2MIBObjects | CISCO-ATM2-MIB |
| 1.3.6.1.4.1.9.10.23.1.2 | ciscoatmSigSupportTable | CISCO-ATM2-MIB |
| 1.3.6.1.4.1.9.10.23.1.2.1 | ciscoatmSigSupportEntry | CISCO-ATM2-MIB |
| 1.3.6.1.4.1.9.10.23.1.2.1.6 | ciscoatmSigSupportBlliRepeatInd | CISCO-ATM2-MIB |