All MIBs › CISCO-ATM2-MIB › ciscoatmInterfaceConfMaxSvpcVpi
ciscoatmInterfaceConfMaxSvpcVpi
Module: CISCO-ATM2-MIB
OID (symbolic): CISCO-ATM2-MIB::ciscoatmInterfaceConfMaxSvpcVpi
OID (numeric): 1.3.6.1.4.1.9.10.23.1.3.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections.
What is ciscoatmInterfaceConfMaxSvpcVpi?
This read-write value sets the maximum VPI the signalling stack on this ATM interface is configured to support for allocation to switched virtual path connections. It's the ceiling an operator sets on how many VPI values the signaling stack is even allowed to hand out for switched virtual paths, independent of what the interface actually negotiates with its peer, so raising it doesn't guarantee more usable VPIs will be granted, it only removes this switch's own self-imposed cap. Setting this to 15 while the interface's real UNI/NNI peer only allows up to VPI 10 would still leave the interface effectively capped at 10.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.23.1.3.1.16 snmpwalk -v2c -c public <target> CISCO-ATM2-MIB::ciscoatmInterfaceConfMaxSvpcVpi
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.23.1.3.1.16.1 snmpget -v2c -c public <target> CISCO-ATM2-MIB::ciscoatmInterfaceConfMaxSvpcVpi.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.23.1.3.1.16.1 i <value>
Start monitoring Cisco routers/switches with ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM2-MIB::ciscoatmInterfaceConfMaxSvpcVpi OID value, configure state conditions and alerts, and monitor any Cisco routers/switches with ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.23 | ciscoAtm2MIB | CISCO-ATM2-MIB |
| 1.3.6.1.4.1.9.10.23.1 | ciscoatm2MIBObjects | CISCO-ATM2-MIB |
| 1.3.6.1.4.1.9.10.23.1.3 | ciscoatmInterfaceExtTable | CISCO-ATM2-MIB |
| 1.3.6.1.4.1.9.10.23.1.3.1 | ciscoatmInterfaceExtEntry | CISCO-ATM2-MIB |
| 1.3.6.1.4.1.9.10.23.1.3.1.16 | ciscoatmInterfaceConfMaxSvpcVpi | CISCO-ATM2-MIB |