Description: This object initiates the polling and stores the status of the last DMT Bin request. This object can have the following values : reset (-1) : write this value to reset the the finite state machine (FSM) that controls the reading of bin information on a DMT interface. pollNow (1) : write this value to begin bin polling on an interface specified in cAdslDmtBinIfNumber. noIfConfigured(2) : status read when no valid interface is set in cAdslDmtBinIfNumber ifConfigured(3) : status read when a valid interface is set in cAdslDmtBinIfNumber rqstInProgress(4) : status returned until the data collection is complete on an interface. lcDownForIf (5) : status returned if the line card is down for the interface. ifUntrained (6) : status returned if the interface on the DSLAM is untrained. failure (7) : status returned when the request cannot be completed due to error. success (8) : status returned when bin data collection has been properly completed. Data collected on a status of success (8) will be available in cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this object can return any value between 2 and 8, while a write can only be set to the value of 1 or -1.