All MIBs › CIENA-CES-SW-XGRADE-MIB › cienaCesSwXgradeOp
cienaCesSwXgradeOp
Module: CIENA-CES-SW-XGRADE-MIB
OID (symbolic): CIENA-CES-SW-XGRADE-MIB::cienaCesSwXgradeOp
OID (numeric): 1.3.6.1.4.1.1271.2.1.13.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: accessible-for-notify
Description: The possible operations for upgrading the software, including:
none: No upgrade operation is selected.
download: This operation is to initiate the file transfer of the software package from the TFTP server specified by cienaCesSwXgradePackagePath to cienaCesSwXgradeDestPath. The default TFTP server is used for file transfer if the cienaCesSwXgradeTftpServer is set to an empty string.
install: This operation is to install the software to the standby CTM (if present) and all line modules. The image files are either stored in the TFTP server specified by cienaCesSwXgradePackagePath and cienaCesSwXgradeTftpServer or in the compact flash of the active CTM.
activate: This operation is to activate any new software installed on all the modules. The system automatically reverts to the previous software package if a protect operation is not set within a time period specified by cienaCesSwXgradeRevertTimeout. If no time period is specified (cienaCesSwXgradeRevertTimeout value 0), then the system does not revert automatically and remains in the unprotected state indefinitely. WARNING: Activating software requires a system restart.
protect: This operation protects a new software package. If the protect operation is not entered before the protect timeout is reached (specified by
cienaCesSwXgradeReverTimeout), the system automatically reverts to the previous software package.
revert: This operation reverts to the previous software package.
validate: This operation validates the software package at the location specified by the cienaCesSwXgradePackagePath. Setting the cienaCesSwXgradePackagePath to an empty string validates the installed software.
run: This operation refers to the downloading, parsing, and executing of a specified command file as initiated through CLI, DHCP, or the file transfer MIB module. This is used in appropriate notifications to report the completion of such event. An error is returned when this object is attempted to be set to this value using an SNMP set-request.
remove: This operation is to remove an installed software package from the CTMs and all line modules.
What is cienaCesSwXgradeOp?
This reports which specific stage of the multi-step software upgrade process, none, download, install, activate, protect, and others, the notification is reporting on. Because the upgrade is explicitly broken into discrete stages, each with its own potential failure mode, a download failure means the TFTP transfer of the package didn't complete, while an install or activate failure means something different happened after the file was already on the device, an admin needs this value to know exactly which stage failed. For example, a notification showing this as download(1) alongside a failure status means the software package itself never fully arrived from the TFTP server, so the admin should first verify TFTP server reachability.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.13 | cienaCesSwXgradeMIB | CIENA-CES-SW-XGRADE-MIB |
| 1.3.6.1.4.1.1271.2.1.13.1 | cienaCesSwXgradeMIBObjects | CIENA-CES-SW-XGRADE-MIB |
| 1.3.6.1.4.1.1271.2.1.13.1.1 | cienaCesSwXgrade | CIENA-CES-SW-XGRADE-MIB |
| 1.3.6.1.4.1.1271.2.1.13.1.1.2 | cienaCesSwXgradeOp | CIENA-CES-SW-XGRADE-MIB |