All MIBs › CIE1000-MIRROR-MIB › cie1000MirrorConfigSessionReflectorPort
cie1000MirrorConfigSessionReflectorPort
Module: CIE1000-MIRROR-MIB
OID (symbolic): CIE1000-MIRROR-MIB::cie1000MirrorConfigSessionReflectorPort
OID (numeric): 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.5
Node type: OBJECT-TYPE
Type: CIE1000InterfaceIndex
Access: read-write
Description: A reflector port is a port that the administrator may have to specify in case the device does not have internal (unused) ports available. Whether this is the case or not for this device can be derived from Mirror capabilities. When 'ReflectorPort' is used, it must be specified when an RMirror source session is enabled. In this case, the reflector port will be shut down for normal front port usage, because the switch needs a port where it can loop frames in order to get mirrored traffic copied onto a particular VLAN ID (the 'RMirrorVlan').
What is cie1000MirrorConfigSessionReflectorPort?
Configures which physical port acts as the reflector port for a mirror session, needed on devices that lack an internal reflector port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.5 snmpwalk -v2c -c public <target> CIE1000-MIRROR-MIB::cie1000MirrorConfigSessionReflectorPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.5.1 snmpget -v2c -c public <target> CIE1000-MIRROR-MIB::cie1000MirrorConfigSessionReflectorPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.5.1 s <value>
Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIE1000-MIRROR-MIB::cie1000MirrorConfigSessionReflectorPort OID value, configure state conditions and alerts, and monitor any Cisco IE1000 industrial Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.832 | ciscoIE1000MIB | CISCO-IE1000-MIB |
| 1.3.6.1.4.1.9.9.832.1 | cie1000SwitchMgmt | CISCO-IE1000-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.832.1.15 | cie1000MirrorMib | CIE1000-MIRROR-MIB |
| 1.3.6.1.4.1.9.9.832.1.15.1 | cie1000MirrorMibObjects | CIE1000-MIRROR-MIB |
| 1.3.6.1.4.1.9.9.832.1.15.1.2 | cie1000MirrorConfig | CIE1000-MIRROR-MIB |
| 1.3.6.1.4.1.9.9.832.1.15.1.2.1 | cie1000MirrorConfigSessionTable | CIE1000-MIRROR-MIB |
| 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1 | cie1000MirrorConfigSessionEntry | CIE1000-MIRROR-MIB |
| 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.5 | cie1000MirrorConfigSessionReflectorPort | CIE1000-MIRROR-MIB |