CIE1000-MIRROR-MIB :: cie1000MirrorConfigSessionRMirrorVlan

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CIE1000-MIRROR-MIB › cie1000MirrorConfigSessionRMirrorVlan

cie1000MirrorConfigSessionRMirrorVlan

Module: CIE1000-MIRROR-MIB

OID (symbolic): CIE1000-MIRROR-MIB::cie1000MirrorConfigSessionRMirrorVlan

OID (numeric): 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.4

Node type: OBJECT-TYPE

Type: CIE1000Unsigned16

Access: read-write

Description: The VLAN ID points out where the monitor packet will copy to. The remote Mirror VLAN ID. Only used for RMirror types.

RMirror source session:

The mirrored traffic is copied onto this VLAN ID.

Traffic will flood to all ports that are members of the remote Mirror VLAN ID.

RMirror destination session:

The #destination_port_list contains the port(s) that the Mirror VLAN will be copied to

in addition to ports that are already configured (through the VLAN module) to be members of this VLAN.

What is cie1000MirrorConfigSessionRMirrorVlan?

Sets the remote mirror VLAN ID used only by RMirror sessions, which carries the mirrored traffic between the source and destination devices.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.4
snmpwalk -v2c -c public <target> CIE1000-MIRROR-MIB::cie1000MirrorConfigSessionRMirrorVlan

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.4.1
snmpget -v2c -c public <target> CIE1000-MIRROR-MIB::cie1000MirrorConfigSessionRMirrorVlan.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.4.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cie1000MirrorConfigSessionRMirrorVlan.1

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIE1000-MIRROR-MIB::cie1000MirrorConfigSessionRMirrorVlan OID value, configure state conditions and alerts, and monitor any Cisco IE1000 industrial Ethernet switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.832ciscoIE1000MIBCISCO-IE1000-MIB
1.3.6.1.4.1.9.9.832.1cie1000SwitchMgmtCISCO-IE1000-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.832.1.15cie1000MirrorMibCIE1000-MIRROR-MIB
1.3.6.1.4.1.9.9.832.1.15.1cie1000MirrorMibObjectsCIE1000-MIRROR-MIB
1.3.6.1.4.1.9.9.832.1.15.1.2cie1000MirrorConfigCIE1000-MIRROR-MIB
1.3.6.1.4.1.9.9.832.1.15.1.2.1cie1000MirrorConfigSessionTableCIE1000-MIRROR-MIB
1.3.6.1.4.1.9.9.832.1.15.1.2.1.1cie1000MirrorConfigSessionEntryCIE1000-MIRROR-MIB
1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.4cie1000MirrorConfigSessionRMirrorVlanCIE1000-MIRROR-MIB