All MIBs › CHECK-MIB › checkResultSeverity
checkResultSeverity
Module: CHECK-MIB
OID (symbolic): CHECK-MIB::checkResultSeverity
OID (numeric): 1.3.6.1.2.1.7777.1.3.1.2
Node type: OBJECT-TYPE
Type: SeverityReturned
Access: read-only
Description: Each time the check defined by this entry (and the corresponding entries of the checkRuleTable) is performed, this object is set to to the maximum value of all checkRuleSeverity objects in corresponding entries of the checkRuleTable for which the check failed. If the check passes for all corresponding rules, then the value of object checkResultSeverity is 0.
If the object checkResultInterval contains the value 0, then the check is performed when the value of checkResultSeverity is retrieved by a manager. If the object checkResultInterval contains a value greater than 0, then the check is performed automatically by the managed node and a read access by a manager just returns the value computed at the last scheduled check.
Each time object checkResultSeverity is set, the value of object checkResultTime in the corresponding entry is set to the current time, and the value of object checkResultSize is set to the number of corresponding entries in the checkRuleTable for which the check failed.
If no check has been performed so far, then the value of this object is 0.
What is checkResultSeverity?
This object holds the maximum severity among all the checkRuleSeverity values of rules that failed the last time this check ran, or 0 if every rule passed. An admin triaging a large number of configured checks scans this field to immediately identify which checks are currently failing and how badly, without needing to inspect every individual rule result underneath each check. A check whose associated rules include severities of 3, 5, and 7, where only the severity-7 rule currently fails, would show this object as 7, not 3 or 5.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.7777.1.3.1.2 snmpwalk -v2c -c public <target> CHECK-MIB::checkResultSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.7777.1.3.1.2.1 snmpget -v2c -c public <target> CHECK-MIB::checkResultSeverity.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> checkResultSeverity.1
Start monitoring SNMP-managed network equipment (any vendor) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CHECK-MIB::checkResultSeverity OID value, configure state conditions and alerts, and monitor any SNMP-managed network equipment (any vendor) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.7777 | ahcfMIB | AHCF-MIB |
| 1.3.6.1.2.1.7777.1 | ahcfObjects | AHCF-MIB |
| 1.3.6.1.2.1.7777.1.3 | ahcfSampleTable | AHCF-MIB |
| 1.3.6.1.2.1.7777.1.3.1 | ahcfSampleEntry | AHCF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.7777.1.3.1.2 | checkResultSeverity | CHECK-MIB |