All MIBs › CERAGON-MIB › gnTrailCfgHoldOffTime
gnTrailCfgHoldOffTime
Module: CERAGON-MIB
OID (symbolic): CERAGON-MIB::gnTrailCfgHoldOffTime
OID (numeric): 1.3.6.1.4.1.2281.4.7.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the hold-off time in milliseconds. Possible values: 0..20000, 100 mSec steps.
What is gnTrailCfgHoldOffTime?
Configures the hold-off time, in 100 millisecond steps up to 20000 ms, that delays a protection switch after a fault is detected on the trail.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2281.4.7.1.1.11 snmpwalk -v2c -c public <target> CERAGON-MIB::gnTrailCfgHoldOffTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2281.4.7.1.1.11.1 snmpget -v2c -c public <target> CERAGON-MIB::gnTrailCfgHoldOffTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2281.4.7.1.1.11.1 i <value>
Start monitoring Ceragon Networks FibeAir microwave radio backhaul systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CERAGON-MIB::gnTrailCfgHoldOffTime OID value, configure state conditions and alerts, and monitor any Ceragon Networks FibeAir microwave radio backhaul systems from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2281 | ceragon | CERAGON-MIB |
| 1.3.6.1.4.1.2281.4 | gnAccess | CERAGON-MIB |
| 1.3.6.1.4.1.2281.4.7 | gnTrailCfg | CERAGON-MIB |
| 1.3.6.1.4.1.2281.4.7.1 | gnTrailCfgTable | CERAGON-MIB |
| 1.3.6.1.4.1.2281.4.7.1.1 | gnTrailCfgEntry | CERAGON-MIB |
| 1.3.6.1.4.1.2281.4.7.1.1.11 | gnTrailCfgHoldOffTime | CERAGON-MIB |