All MIBs › CERAGON-MIB › gnHptCfgSDThresh
gnHptCfgSDThresh
Module: CERAGON-MIB
OID (symbolic): CERAGON-MIB::gnHptCfgSDThresh
OID (numeric): 1.3.6.1.4.1.2281.3.2.3.7.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If the bit error rate is higher than this threshold a SD alarm would be generated. SD is for Signal Degrade.
What is gnHptCfgSDThresh?
Sets the bit error rate threshold above which the device raises an SD (Signal Degrade) alarm on the high-order path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2281.3.2.3.7.1.6 snmpwalk -v2c -c public <target> CERAGON-MIB::gnHptCfgSDThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2281.3.2.3.7.1.6.1 snmpget -v2c -c public <target> CERAGON-MIB::gnHptCfgSDThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2281.3.2.3.7.1.6.1 i <value>
Start monitoring Ceragon Networks FibeAir microwave radio backhaul systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CERAGON-MIB::gnHptCfgSDThresh OID value, configure state conditions and alerts, and monitor any Ceragon Networks FibeAir microwave radio backhaul systems from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2281 | ceragon | CERAGON-MIB |
| 1.3.6.1.4.1.2281.3 | gnUnits | CERAGON-MIB |
| 1.3.6.1.4.1.2281.3.2 | gnIDU | CERAGON-MIB |
| 1.3.6.1.4.1.2281.3.2.3 | gnMux | CERAGON-MIB |
| 1.3.6.1.4.1.2281.3.2.3.7 | gnHptCfgTable | CERAGON-MIB |
| 1.3.6.1.4.1.2281.3.2.3.7.1 | gnHptCfgEntry | CERAGON-MIB |
| 1.3.6.1.4.1.2281.3.2.3.7.1.6 | gnHptCfgSDThresh | CERAGON-MIB |