All MIBs › CERAGON-MIB › gnGenStatDeviceIDUStatus
gnGenStatDeviceIDUStatus
Module: CERAGON-MIB
OID (symbolic): CERAGON-MIB::gnGenStatDeviceIDUStatus
OID (numeric): 1.3.6.1.4.1.2281.2.1.9.1.11
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: IDU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears.
bit 1 = Power status bit 2 = Cable open status bit 3 = Cable short status bit 4 = Modem Lock status bit 5 = Temperature status bit 6 = No signal from ODU (Phos only) bit 7 = loopback status bit 8 = External alarm 1 status bit 9 = External alarm 2 status bit 10 = External alarm 3 status bit 11 = External alarm 4 status bit 12 = External alarm 5 status bit 13 = External alarm 6 status bit 14 = External alarm 7 status bit 15 = External alarm 8 status bit 16 = Remote connectivity status. bit 17 = Inner communication status. bit 18 = Link ID mismatch status. bit 19 = Configuration mismatch status. bit 20 = Shelf Id mismatch status (Phos only). bit 21 = General HW failure. bit 22 = No power to MUX board. bit 23 = No power to MODEM board. bit 24 = IDC disk firmware cinfiguration mismatch. bit 25 = Modem configuration file. bit 26 = Wayside channel E1/T1 LOS bit 27 = loopback on Wayside channel
What is gnGenStatDeviceIDUStatus?
A read-only bitmask reporting fault conditions in the indoor unit (IDU), such as power status, cable open/short, and modem lock status.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2281.2.1.9.1.11 snmpwalk -v2c -c public <target> CERAGON-MIB::gnGenStatDeviceIDUStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2281.2.1.9.1.11.1 snmpget -v2c -c public <target> CERAGON-MIB::gnGenStatDeviceIDUStatus.1
Start monitoring Ceragon Networks FibeAir microwave radio backhaul systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CERAGON-MIB::gnGenStatDeviceIDUStatus OID value, configure state conditions and alerts, and monitor any Ceragon Networks FibeAir microwave radio backhaul systems from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2281 | ceragon | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2 | gnSystem | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2.1 | gnGeneral | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2.1.9 | gnGenStatDeviceTable | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2.1.9.1 | gnGenStatDeviceEntry | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2.1.9.1.11 | gnGenStatDeviceIDUStatus | CERAGON-MIB |