All MIBs › CERAGON-MIB › gnGenDrawerXDeviceIDUStatus
gnGenDrawerXDeviceIDUStatus
Module: CERAGON-MIB
OID (symbolic): CERAGON-MIB::gnGenDrawerXDeviceIDUStatus
OID (numeric): 1.3.6.1.4.1.2281.2.1.27.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: IDU status reported with this parameter. Bit1 is MSB. The bit is set when a fault occurs. The bit is cleared when the fault clears.
bit 1 = Power status bit 2 = Cable open status bit 3 = Cable short status bit 4 = Modem Lock status bit 5 = Temperature status bit 6 = No signal from ODU (Phos only) bit 7 = loopback status bit 8 = External alarm 1 status bit 9 = External alarm 2 status bit 10 = External alarm 3 status bit 11 = External alarm 4 status bit 12 = External alarm 5 status bit 13 = External alarm 6 status bit 14 = External alarm 7 status bit 15 = External alarm 8 status bit 16 = Remote connectivity status. bit 17 = Inner communication status. bit 18 = Link ID mismatch status. bit 19 = Configuration mismatch status. bit 20 = Shelf Id mismatch status (Phos only). bit 21 = General HW failure. bit 22 = No power to MUX board. bit 23 = No power to MODEM board. bit 24 = IDC disk firmware cinfiguration mismatch. bit 25 = Modem configuration file. bit 26 = Wayside channel E1/T1 LOS bit 27 = loopback on Wayside channel
What is gnGenDrawerXDeviceIDUStatus?
A bitmask reporting fault conditions on the indoor unit (IDU), such as power status, cable open, cable short, and modem lock status, with each bit set while the corresponding fault is active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2281.2.1.27.1.7 snmpwalk -v2c -c public <target> CERAGON-MIB::gnGenDrawerXDeviceIDUStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2281.2.1.27.1.7.1 snmpget -v2c -c public <target> CERAGON-MIB::gnGenDrawerXDeviceIDUStatus.1
Start monitoring Ceragon Networks FibeAir microwave radio backhaul systems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CERAGON-MIB::gnGenDrawerXDeviceIDUStatus OID value, configure state conditions and alerts, and monitor any Ceragon Networks FibeAir microwave radio backhaul systems from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2281 | ceragon | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2 | gnSystem | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2.1 | gnGeneral | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2.1.27 | gnGenDrawerXTable | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2.1.27.1 | gnGenDrawerXEntry | CERAGON-MIB |
| 1.3.6.1.4.1.2281.2.1.27.1.7 | gnGenDrawerXDeviceIDUStatus | CERAGON-MIB |