All MIBs › CDMIPController › cdmipSatelliteHdlcAddress3
cdmipSatelliteHdlcAddress3
Module: CDMIPController
OID (symbolic): CDMIPController::cdmipSatelliteHdlcAddress3
OID (numeric): 1.3.6.1.4.1.6247.4.3.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: HDLC Channel Address #3 filtered by the HSR
Valid values of HDLC address depends on the Network mode.
In Small Network Mode - Frame will have 1 Byte of HDLC addr. valid values are 1 - 254. (0x1 - 0xFE) In Large Network Mode - Frame will have 2 Bytes of HDLC address. valid values are 1 - 32766 (0x1 - 0x7FFE)
In Point-to-Point Mode - HDLC addresses are NOT-USED.
An HDLC Address of '0(Zero)' is interpretted as NOT-DEFINED or NOT-USED
An HDLC address cannot have 0x00 or 0xFF in least Significant Byte. i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses.
User is NOT allowed to configure HDLC address while system is operating in EASY CONNECT MODE.
To Invalidate/Delete HDLC Address, set the MIB member 'cdmipSatelliteHdlcAddressDelete' to the HDLC address number. HDLC Address number range from 1...4
What is cdmipSatelliteHdlcAddress3?
This sets the third HDLC channel address filtered by the satellite-side traffic filter, independent of the addresses in slots 1 and 2. A third address slot supports a third distinct traffic stream being recognized by this unit's HDLC filter simultaneously with the first two, useful in more complex multi-service deployments over one satellite carrier. A site running three separate services over the same carrier, such as data, voice, and telemetry, might assign address 25 to this slot specifically for the telemetry stream.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6247.4.3.2.7 snmpwalk -v2c -c public <target> CDMIPController::cdmipSatelliteHdlcAddress3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6247.4.3.2.7.1 snmpget -v2c -c public <target> CDMIPController::cdmipSatelliteHdlcAddress3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6247.4.3.2.7.1 i <value>
Start monitoring Comtech EF Data satellite modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CDMIPController::cdmipSatelliteHdlcAddress3 OID value, configure state conditions and alerts, and monitor any Comtech EF Data satellite modems from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6247 | comtechEFData | ComtechEFData |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6247.4 | cdmipController | CDMIPController |
| 1.3.6.1.4.1.6247.4.3 | cdmipInterfaces | CDMIPController |
| 1.3.6.1.4.1.6247.4.3.2 | cdmipSatelliteInterface | CDMIPController |
| 1.3.6.1.4.1.6247.4.3.2.7 | cdmipSatelliteHdlcAddress3 | CDMIPController |