This read-only object reports an estimated corrected BER, computed by multiplying the Multiplier value by 10E-10, returning the maximum integer (2147483647) if the demodulator is unlocked, with UNITS explicitly declared as 'Scale Factor by 10E-10.' Functionally identical to cddRxBERMultiplier, this is the application-relevant error-rate metric that complements the Eb/No reading -- a link can show acceptable Eb/No while still delivering a BER too high for a particular carried service, making this the value to check when application-layer errors are reported despite seemingly adequate signal quality. A Multiplier reading in the low hundreds would indicate a very clean BER around 10^-8, while a reading climbing into the tens of millions signals a BER degrading toward a level where an admin should expect visible data errors in the carried traffic.