This read-write object sets the target Eb/No for the remote demodulator that AUPC tries to maintain, from 0.0 to 14.9 dB in 0.1 dB units. This is the setpoint AUPC's automatic power-adjustment loop tries to hold the far-end's Eb/No at, so setting it too close to the far end's actual minimum lock threshold leaves little margin for AUPC to protect against, while setting it unnecessarily high wastes transmit power capacity that could otherwise provide fade headroom during a deeper-than-expected fade. For a remote demodulator that needs roughly 6 dB Eb/No to maintain a comfortable margin above its FEC lock threshold, an admin would set this target near that value so AUPC continuously adjusts this unit's transmit power to keep the far end's received Eb/No hovering near it.