All MIBs › CDD-564 › cdd564RxAcquisitionSweepWidth
cdd564RxAcquisitionSweepWidth
Module: CDD-564
OID (symbolic): CDD-564::cdd564RxAcquisitionSweepWidth
OID (numeric): 1.3.6.1.4.1.6247.25.1.7.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Rx +/- acquisition sweep range of demodulator, in KHz, ranging from: +/- 1 to +/- 32 KHz (rates < 625 ksym/second) or +/- 1 to 200 KHz (rates >= 625 ksym/second)
What is cdd564RxAcquisitionSweepWidth?
This read-write object sets how far, in KHz, the demodulator will sweep around the configured Rx frequency while trying to acquire lock, ranging up to +/-32 KHz at lower symbol rates or up to +/-200 KHz at symbol rates of 625 ksym/s and above. This compensates for frequency uncertainty from LO drift, Doppler shift, or slight frequency-plan errors, so widening it increases the chance of acquiring lock on a slightly mistuned or drifting carrier, at the cost of a longer acquisition search and a small risk of locking onto an adjacent, unwanted carrier if set too wide. On a mobile or Doppler-affected link where the actual carrier frequency can wander by tens of KHz, an admin would increase this sweep width toward its 200 KHz ceiling to keep the demodulator able to reacquire lock after brief outages.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6247.25.1.7.1.1.1.7 snmpwalk -v2c -c public <target> CDD-564::cdd564RxAcquisitionSweepWidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6247.25.1.7.1.1.1.7.1 snmpget -v2c -c public <target> CDD-564::cdd564RxAcquisitionSweepWidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6247.25.1.7.1.1.1.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cdd564RxAcquisitionSweepWidth.1
Start monitoring Comtech EF Data CDD-564 satellite demodulator with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CDD-564::cdd564RxAcquisitionSweepWidth OID value, configure state conditions and alerts, and monitor any Comtech EF Data CDD-564 satellite demodulator from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6247 | comtechEFData | ComtechEFData |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6247.25 | cdd564 | CDD-564 |
| 1.3.6.1.4.1.6247.25.1 | cdd564Objects | CDD-564 |
| 1.3.6.1.4.1.6247.25.1.7 | cdd564Config | CDD-564 |
| 1.3.6.1.4.1.6247.25.1.7.1 | cdd564Rx | CDD-564 |
| 1.3.6.1.4.1.6247.25.1.7.1.1 | cdd564RxTable | CDD-564 |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1 | cdd564RxEntry | CDD-564 |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.7 | cdd564RxAcquisitionSweepWidth | CDD-564 |