CAT2600-MIB :: cat2600TsPortSwitchModeChangeTrapEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAT2600-MIBcat2600TsPortSwitchModeChangeTrapEnable

cat2600TsPortSwitchModeChangeTrapEnable

Module: CAT2600-MIB

OID (symbolic): CAT2600-MIB::cat2600TsPortSwitchModeChangeTrapEnable

OID (numeric): 1.3.6.1.4.1.9.1.111.1.2.1.1.24

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enable or disable the trap sent out when the switching mode changes from cut-through to store and forward.

What is cat2600TsPortSwitchModeChangeTrapEnable?

This is a simple on/off switch controlling whether the switch emits an SNMP trap whenever a port transitions from cut-through to store-and-forward switching mode. An admin disables it on switches with chronically marginal links to avoid trap-flooding a monitoring station with noise, while leaving it enabled on critical uplinks where any such mode change is worth immediate notification. Setting this to disable(2) silences those specific mode-change traps without affecting other trap types like cat2600TsSysTemperature alerts.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.1.111.1.2.1.1.24
snmpwalk -v2c -c public <target> CAT2600-MIB::cat2600TsPortSwitchModeChangeTrapEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.1.111.1.2.1.1.24.1
snmpget -v2c -c public <target> CAT2600-MIB::cat2600TsPortSwitchModeChangeTrapEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.1.111.1.2.1.1.24.1 i <value>

Start monitoring Cisco Catalyst 2600 switching hub (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAT2600-MIB::cat2600TsPortSwitchModeChangeTrapEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 2600 switching hub (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.1catProdCAT2600-MIB
1.3.6.1.4.1.9.1.111cat2600CAT2600-MIB
1.3.6.1.4.1.9.1.111.1cat2600TsCAT2600-MIB
1.3.6.1.4.1.9.1.111.1.2cat2600TsObjectsCAT2600-MIB
1.3.6.1.4.1.9.1.111.1.2.1cat2600TsMainCAT2600-MIB
1.3.6.1.4.1.9.1.111.1.2.1.1cat2600TsConfigCAT2600-MIB
1.3.6.1.4.1.9.1.111.1.2.1.1.24cat2600TsPortSwitchModeChangeTrapEnableCAT2600-MIB