All MIBs › CAT2600-MIB › cat2600TsPortCfgRingSpeed
cat2600TsPortCfgRingSpeed
Module: CAT2600-MIB
OID (symbolic): CAT2600-MIB::cat2600TsPortCfgRingSpeed
OID (numeric): 1.3.6.1.4.1.9.1.111.1.2.2.1.1.28
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When read this object indicates the Port Ring Speed obtained by the RSA function.
Write to this object when defining the Port Ring Speed for a fixed configuration (TsPortCfgRSA set to fixed(2)).
When TsPortCfgRSA indicates fixed(2), this object is equivalent to the dtrMac MIB object cPortProtocolCharMediumRateOption and to dot5RingSpeed.
Note that the syntax of these objects is different. For cPortProtocolCharMediumRateOption 1 indicates 4 Mb/s, while for TsPortCfgRingSpeed 1 indicates 16Mb/s.
This object is a valid read object any time that TSPortLinkState indicates up(1)or when TsPortCfgRSA indicates fixed(2).
What is cat2600TsPortCfgRingSpeed?
This reports the Token-Ring speed the port's Ring Speed Adjust (RSA) function detected, or lets the admin force a fixed speed when cat2600TsPortCfgRSA is set to fixed -- equivalent to the dtrMac MIB's cPortProtocolCharMediumRateOption and to the standard dot5RingSpeed object, though the description notes the syntax differs between them. An admin needs this correct because a Token-Ring segment where devices disagree on ring speed (4 Mbps versus 16 Mbps) simply won't form a working ring at all. Forcing this to speed-16megabit(1) on a fixed configuration would be typical for a modern high-speed Token-Ring segment where auto-negotiation via RSA isn't trusted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.1.111.1.2.2.1.1.28 snmpwalk -v2c -c public <target> CAT2600-MIB::cat2600TsPortCfgRingSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.1.111.1.2.2.1.1.28.1 snmpget -v2c -c public <target> CAT2600-MIB::cat2600TsPortCfgRingSpeed.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.1.111.1.2.2.1.1.28.1 i <value>
Start monitoring Cisco Catalyst 2600 switching hub (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAT2600-MIB::cat2600TsPortCfgRingSpeed OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 2600 switching hub (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.1 | catProd | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111 | cat2600 | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1 | cat2600Ts | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2 | cat2600TsObjects | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2.2 | cat2600TsPort | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2.2.1 | cat2600TsPortTable | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2.2.1.1 | cat2600TsPortEntry | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2.2.1.1.28 | cat2600TsPortCfgRingSpeed | CAT2600-MIB |