All MIBs › CAT2600-MIB › cat2600TsPipePorts
cat2600TsPipePorts
Module: CAT2600-MIB
OID (symbolic): CAT2600-MIB::cat2600TsPipePorts
OID (numeric): 1.3.6.1.4.1.9.1.111.1.2.4.1.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The set of ports in this switch which are active in this Pipe. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16 (if available), etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the NWays LAN Switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
What is cat2600TsPipePorts?
This is a 32-bit bitmap defining which physical ports belong to a given TokenPipe, using the same most-significant-bit-is-lowest-port-number convention seen in cat2600TsDmnPorts and cat2600TsFilterPorts. An admin edits this to group or regroup ports into shared Token-Ring segments (pipes) without recabling, effectively defining which ports share the same logical ring. Setting the first octet to 0xC0 would place ports 1 and 2 into this pipe while excluding all other ports covered by that octet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.1.111.1.2.4.1.1.2 snmpwalk -v2c -c public <target> CAT2600-MIB::cat2600TsPipePorts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.1.111.1.2.4.1.1.2.1 snmpget -v2c -c public <target> CAT2600-MIB::cat2600TsPipePorts.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.1.111.1.2.4.1.1.2.1 s <value>
Start monitoring Cisco Catalyst 2600 switching hub (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAT2600-MIB::cat2600TsPipePorts OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 2600 switching hub (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.1 | catProd | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111 | cat2600 | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1 | cat2600Ts | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2 | cat2600TsObjects | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2.4 | cat2600TsPipe | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2.4.1 | cat2600TsPipeTable | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2.4.1.1 | cat2600TsPipeEntry | CAT2600-MIB |
| 1.3.6.1.4.1.9.1.111.1.2.4.1.1.2 | cat2600TsPipePorts | CAT2600-MIB |