CAMBIUM-PTP670-MIB :: incompatibleMasterAndSlaveLinked

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP670-MIBincompatibleMasterAndSlaveLinked

incompatibleMasterAndSlaveLinked

Module: CAMBIUM-PTP670-MIB

OID (symbolic): CAMBIUM-PTP670-MIB::incompatibleMasterAndSlaveLinked

OID (numeric): 1.3.6.1.4.1.17713.11.13.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: A non-zero value indicates that the master and slave ends of a link are different hardware products, or have different software versions, or have different TDD Frame Configuraton Modes (Standard/Expert) in HCMP topology. NB: It is very unusual to detect this, because incompatible units will normally fail to establish a wireless link. However, some combinations may establish a partial wireless link and detect this situation. NB: A non-zero value may generate an SNMP trap and/or SMTP email alert

What is incompatibleMasterAndSlaveLinked?

A non-zero value indicates the master and slave ends of the link are different hardware products, running different software versions, or have mismatched TDD Frame Configuration Modes in HCMP topology; this is unusual to see since incompatible units normally fail to link at all, but some combinations may partially link and trigger this. It is read-only, and a non-zero value may generate an SNMP trap or SMTP alert, making it a key diagnostic when a link behaves oddly despite appearing to connect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.11.13.10
snmpwalk -v2c -c public <target> CAMBIUM-PTP670-MIB::incompatibleMasterAndSlaveLinked

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.11.13.10.1
snmpget -v2c -c public <target> CAMBIUM-PTP670-MIB::incompatibleMasterAndSlaveLinked.1

Start monitoring Cambium Networks PTP-series wireless Ethernet bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP670-MIB::incompatibleMasterAndSlaveLinked OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP-series wireless Ethernet bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.11ptp670CAMBIUM-PTP670-MIB
1.3.6.1.4.1.17713.11.13alarmsCAMBIUM-PTP670-MIB
1.3.6.1.4.1.17713.11.13.10incompatibleMasterAndSlaveLinkedCAMBIUM-PTP670-MIB