All MIBs › CALISTA-DPA-MIB › cmConnectionState
cmConnectionState
Module: CALISTA-DPA-MIB
OID (symbolic): CALISTA-DPA-MIB::cmConnectionState
OID (numeric): 1.3.6.1.4.1.7505.1.1.16.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current state of this connection. The possible values have the following meanings: idle initial state of the link before a connection has been attempted, and the state to which a link changes after teardown
connecting a TCP link to a Cisco CallManager system is in the process of being established
retryBackOff the attempt to establish to the Cisco CallManager failed; the connection stays in this state for a short while before the DPA tries again
connectPending the retry back off period has finished and the DPA is about to re-attempt connection to the Cisco CallManager
active the connection has been successfully established; this state signifies that the connection is being used for transmission and reception of Skinny Station Protocol messages
standby the connection has been successfully established but it is not currently being used for data traffic; however, it would move into the active state were the currently active connection to go down
What is cmConnectionState?
Reports the current state of a port's connection to a CallManager, such as idle before a connection attempt or other states defined for the link lifecycle.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7505.1.1.16.1.6 snmpwalk -v2c -c public <target> CALISTA-DPA-MIB::cmConnectionState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7505.1.1.16.1.6.1 snmpget -v2c -c public <target> CALISTA-DPA-MIB::cmConnectionState.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cmConnectionState.1
Start monitoring Calista Networks DPA (Data Path Accelerator) PBX-to-VoIP gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CALISTA-DPA-MIB::cmConnectionState OID value, configure state conditions and alerts, and monitor any Calista Networks DPA (Data Path Accelerator) PBX-to-VoIP gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7505 | calista | CALISTA-DPA-MIB |
| 1.3.6.1.4.1.7505.1 | products | CALISTA-DPA-MIB |
| 1.3.6.1.4.1.7505.1.1 | dpa | CALISTA-DPA-MIB |
| 1.3.6.1.4.1.7505.1.1.16 | callManagerConnectionTable | CALISTA-DPA-MIB |
| 1.3.6.1.4.1.7505.1.1.16.1 | callManagerConnectionEntry | CALISTA-DPA-MIB |
| 1.3.6.1.4.1.7505.1.1.16.1.6 | cmConnectionState | CALISTA-DPA-MIB |