CAIWINA3-MIB :: winA3ConfigJobAutoCpuWarn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAIWINA3-MIBwinA3ConfigJobAutoCpuWarn

winA3ConfigJobAutoCpuWarn

Module: CAIWINA3-MIB

OID (symbolic): CAIWINA3-MIB::winA3ConfigJobAutoCpuWarn

OID (numeric): 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.15

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: &Default warning threshold, in seconds, for the cpu utilization monitoring of any job watcher created by the auto watcher. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in winA3StatusJobCpuInterval, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). The value of winA3StatusJobCpuInterval will be the reference value for n% notations.

What is winA3ConfigJobAutoCpuWarn?

This read-write setting specifies the default warning (rising) threshold, in seconds, for CPU utilization monitoring of job watchers created by the auto watcher.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.15
snmpwalk -v2c -c public <target> CAIWINA3-MIB::winA3ConfigJobAutoCpuWarn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.15.1
snmpget -v2c -c public <target> CAIWINA3-MIB::winA3ConfigJobAutoCpuWarn.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.15.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> winA3ConfigJobAutoCpuWarn.1

Start monitoring Windows server managed by CA Unicenter TNG (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAIWINA3-MIB::winA3ConfigJobAutoCpuWarn OID value, configure state conditions and alerts, and monitor any Windows server managed by CA Unicenter TNG (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.791caiCA-NTOS-MIB
1.3.6.1.4.1.791.2caiSysMgrCA-NTOS-MIB
1.3.6.1.4.1.791.2.10tngCA-W2KOS-MIB
1.3.6.1.4.1.791.2.10.2agentsCA-W2KOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.791.2.10.2.90caiWinA3CAIWINA3-MIB
1.3.6.1.4.1.791.2.10.2.90.1winA3ConfigGroupCAIWINA3-MIB
1.3.6.1.4.1.791.2.10.2.90.1.13winA3ConfigJobGroupCAIWINA3-MIB
1.3.6.1.4.1.791.2.10.2.90.1.13.24winA3ConfigJobAutoTableCAIWINA3-MIB
1.3.6.1.4.1.791.2.10.2.90.1.13.24.1winA3ConfigJobAutoEntryCAIWINA3-MIB
1.3.6.1.4.1.791.2.10.2.90.1.13.24.1.15winA3ConfigJobAutoCpuWarnCAIWINA3-MIB