All MIBs › CAIUXSA2-MIB › uxsA2StatusCPUTotalLoadMonitor

uxsA2StatusCPUTotalLoadMonitor

OID (symbolic): CAIUXSA2-MIB::uxsA2StatusCPUTotalLoadMonitor

OID (numeric): 1.3.6.1.4.1.791.2.10.2.74.2.4.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: &Current monitor level for the total CPU utilization monitoring of the CPU watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning threshold to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical threshold to determine the status of the resource. If set to 4 (both), the agent evaluates both the warning and critical thresholds to determine the status of the resource. The critical threshold comes into effect if the warning threshold is set to the same value.

What is uxsA2StatusCPUTotalLoadMonitor?

Configures the monitoring level applied to the total CPU utilization check performed by the CPU watcher, letting the agent be set to ignore thresholds, evaluate only the warning threshold, or fully monitor both warning and critical thresholds.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.74.2.4.10
snmpwalk -v2c -c public <target> CAIUXSA2-MIB::uxsA2StatusCPUTotalLoadMonitor

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.74.2.4.10.1
snmpget -v2c -c public <target> CAIUXSA2-MIB::uxsA2StatusCPUTotalLoadMonitor.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.791.2.10.2.74.2.4.10.1 i <value>

Start monitoring UNIX server managed by CA Unicenter TNG (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAIUXSA2-MIB::uxsA2StatusCPUTotalLoadMonitor OID value, configure state conditions and alerts, and monitor any UNIX server managed by CA Unicenter TNG (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.791	cai	CA-NTOS-MIB
1.3.6.1.4.1.791.2	caiSysMgr	CA-NTOS-MIB
1.3.6.1.4.1.791.2.10	tng	CA-W2KOS-MIB
1.3.6.1.4.1.791.2.10.2	agents	CA-W2KOS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.791.2.10.2.74	caiUxsA2	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.2	uxsA2StatusGroup	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.2.4	uxsA2StatusCPUGroup	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.2.4.10	uxsA2StatusCPUTotalLoadMonitor	CAIUXSA2-MIB

CAIUXSA2-MIB :: uxsA2StatusCPUTotalLoadMonitor

uxsA2StatusCPUTotalLoadMonitor

Module

This MIB depends on