All MIBs › CAIUXSA2-MIB › uxsA2ConfigHardwrAutoResultMonitor

uxsA2ConfigHardwrAutoResultMonitor

OID (symbolic): CAIUXSA2-MIB::uxsA2ConfigHardwrAutoResultMonitor

OID (numeric): 1.3.6.1.4.1.791.2.10.2.74.1.19.23.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: &Default monitor level for the result monitoring of any hardware resource watcher created by the auto watcher. If set to 1 (do-not-monitor), the agent disregards all thresholds and sets the status to ok. If set to 2 (warning-only), the agent evaluates only the warning thresholds (both minimum and maximum) to determine the status of the resource. If set to 3 (critical-only), the agent evaluates only the critical thresholds (both minimum and maximum) to determine the status of the resource. If set to 4 (minimum-only), the agent evaluates only the minimum thresholds (both warning and critical) to determine the status of the resource. If set to 5 (maximum-only), the agent evaluates only the maximum thresholds (both warning and critical) to determine the status of the resource. If set to 6 (all), the agent evaluates all thresholds to determine the status of the resource.

What is uxsA2ConfigHardwrAutoResultMonitor?

Sets the default result-monitoring level (e.g. do-not-monitor, warning-only) applied to hardware resource watchers created by this auto watcher.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.74.1.19.23.1.16
snmpwalk -v2c -c public <target> CAIUXSA2-MIB::uxsA2ConfigHardwrAutoResultMonitor

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.74.1.19.23.1.16.1
snmpget -v2c -c public <target> CAIUXSA2-MIB::uxsA2ConfigHardwrAutoResultMonitor.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.791.2.10.2.74.1.19.23.1.16.1 i <value>

Start monitoring UNIX server managed by CA Unicenter TNG (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAIUXSA2-MIB::uxsA2ConfigHardwrAutoResultMonitor OID value, configure state conditions and alerts, and monitor any UNIX server managed by CA Unicenter TNG (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.791	cai	CA-NTOS-MIB
1.3.6.1.4.1.791.2	caiSysMgr	CA-NTOS-MIB
1.3.6.1.4.1.791.2.10	tng	CA-W2KOS-MIB
1.3.6.1.4.1.791.2.10.2	agents	CA-W2KOS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.791.2.10.2.74	caiUxsA2	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1	uxsA2ConfigGroup	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.19	uxsA2ConfigHardwrGroup	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.19.23	uxsA2ConfigHardwrAutoTable	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.19.23.1	uxsA2ConfigHardwrAutoEntry	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.19.23.1.16	uxsA2ConfigHardwrAutoResultMonitor	CAIUXSA2-MIB

CAIUXSA2-MIB :: uxsA2ConfigHardwrAutoResultMonitor

uxsA2ConfigHardwrAutoResultMonitor

Module

This MIB depends on