All MIBs › CAIUXSA2-MIB › uxsA2ConfigFSysInodesWarn

uxsA2ConfigFSysInodesWarn

OID (symbolic): CAIUXSA2-MIB::uxsA2ConfigFSysInodesWarn

OID (numeric): 1.3.6.1.4.1.791.2.10.2.74.1.10.17

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: &Default warning threshold for the inodes used monitoring of the file system watcher to add. The active warning threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in uxsA2StatusFSysInodesTotal, but cannot be greater than the active critical threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value (n) or a percentage (n%). It can also be specified as the absolute value left free (nF). The value of uxsA2StatusFSysInodesTotal will be the reference value for n% and nF notations.

What is uxsA2ConfigFSysInodesWarn?

A read-write setting for the default warning threshold on inode usage for a new file system watcher; the agent raises a warning when the number of used inodes rises above this derived value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.74.1.10.17
snmpwalk -v2c -c public <target> CAIUXSA2-MIB::uxsA2ConfigFSysInodesWarn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.74.1.10.17.1
snmpget -v2c -c public <target> CAIUXSA2-MIB::uxsA2ConfigFSysInodesWarn.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.791.2.10.2.74.1.10.17.1 s <value>

Start monitoring UNIX server managed by CA Unicenter TNG (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAIUXSA2-MIB::uxsA2ConfigFSysInodesWarn OID value, configure state conditions and alerts, and monitor any UNIX server managed by CA Unicenter TNG (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.791	cai	CA-NTOS-MIB
1.3.6.1.4.1.791.2	caiSysMgr	CA-NTOS-MIB
1.3.6.1.4.1.791.2.10	tng	CA-W2KOS-MIB
1.3.6.1.4.1.791.2.10.2	agents	CA-W2KOS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.791.2.10.2.74	caiUxsA2	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1	uxsA2ConfigGroup	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.10	uxsA2ConfigFSysGroup	CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.10.17	uxsA2ConfigFSysInodesWarn	CAIUXSA2-MIB

CAIUXSA2-MIB :: uxsA2ConfigFSysInodesWarn

uxsA2ConfigFSysInodesWarn

Module

This MIB depends on