CAIUXSA2-MIB :: uxsA2ConfigFSysAutoSpaceDCrit

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAIUXSA2-MIBuxsA2ConfigFSysAutoSpaceDCrit

uxsA2ConfigFSysAutoSpaceDCrit

Module: CAIUXSA2-MIB

OID (symbolic): CAIUXSA2-MIB::uxsA2ConfigFSysAutoSpaceDCrit

OID (numeric): 1.3.6.1.4.1.791.2.10.2.74.1.10.32.1.16

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: &Default critical threshold, in kilobytes, for the delta space utilization monitoring of any file system watcher created by the auto watcher. The active critical threshold is derived from this value and represents a rising threshold. The derived value must be greater than 0.0, less than or equal to the total value (maximum capacity) of the monitored resource as specified in uxsA2StatusFSysSpaceTotal, but cannot be less than the active warning threshold. These constraints will be maintained by the agent during all configuration actions. The threshold can be specified as either an absolute value or a percentage and can denote a growth, shrinkage or change in either direction: Absolute shrinkage (n-), absolute growth (n+), absolute change in either direction (n), percentage shrinkage (n%-), percentage growth (n%+), or percentage change in either direction (n%). The value of uxsA2StatusFSysSpaceTotal will be the reference value for n% notations.

What is uxsA2ConfigFSysAutoSpaceDCrit?

This read-write value sets the default critical threshold, in kilobytes, for the rate of change (delta) in space utilization on auto-discovered file system watchers.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.74.1.10.32.1.16
snmpwalk -v2c -c public <target> CAIUXSA2-MIB::uxsA2ConfigFSysAutoSpaceDCrit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.791.2.10.2.74.1.10.32.1.16.1
snmpget -v2c -c public <target> CAIUXSA2-MIB::uxsA2ConfigFSysAutoSpaceDCrit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.791.2.10.2.74.1.10.32.1.16.1 s <value>

Start monitoring UNIX server managed by CA Unicenter TNG (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAIUXSA2-MIB::uxsA2ConfigFSysAutoSpaceDCrit OID value, configure state conditions and alerts, and monitor any UNIX server managed by CA Unicenter TNG (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.791caiCA-NTOS-MIB
1.3.6.1.4.1.791.2caiSysMgrCA-NTOS-MIB
1.3.6.1.4.1.791.2.10tngCA-W2KOS-MIB
1.3.6.1.4.1.791.2.10.2agentsCA-W2KOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.791.2.10.2.74caiUxsA2CAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1uxsA2ConfigGroupCAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.10uxsA2ConfigFSysGroupCAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.10.32uxsA2ConfigFSysAutoTableCAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.10.32.1uxsA2ConfigFSysAutoEntryCAIUXSA2-MIB
1.3.6.1.4.1.791.2.10.2.74.1.10.32.1.16uxsA2ConfigFSysAutoSpaceDCritCAIUXSA2-MIB