All MIBs › CADANT-CMTS-DOWNCHANNEL-MIB › cadIfDownChannelCACL2Threshold
cadIfDownChannelCACL2Threshold
Module: CADANT-CMTS-DOWNCHANNEL-MIB
OID (symbolic): CADANT-CMTS-DOWNCHANNEL-MIB::cadIfDownChannelCACL2Threshold
OID (numeric): 1.3.6.1.4.1.4998.1.1.15.2.1.1.22
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Percentage of available bandwidth on the channel that can be reserved for admitted/active service flows before the channel goes into Level 2 Overload. When a channel goes into Level 2 Overload, a warning message will be logged. Service flow activation/admission will not be denied in Level 2 Overload.
A channel in Level 2 Overload is a good candidate for overload control or load balancing actions.
If the percentage is set to 0, the default value will be used and reading this object must return the the default L2 threshold.
If a set operation tries to change the value of an existing instance of this object to any value that is higher than cadIfDownChannelCACL3Threshold or lower than cadIfDownChannelCACL1Threshold on the same row, then an 'inconsistentValue' error must be returned.
What is cadIfDownChannelCACL2Threshold?
Configures the Level 2 CAC overload threshold as a percentage of downstream channel bandwidth. Exceeding this level triggers a warning log entry, though service flow admission is not yet blocked at this stage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.15.2.1.1.22 snmpwalk -v2c -c public <target> CADANT-CMTS-DOWNCHANNEL-MIB::cadIfDownChannelCACL2Threshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.15.2.1.1.22.1 snmpget -v2c -c public <target> CADANT-CMTS-DOWNCHANNEL-MIB::cadIfDownChannelCACL2Threshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4998.1.1.15.2.1.1.22.1 i <value>
Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-DOWNCHANNEL-MIB::cadIfDownChannelCACL2Threshold OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4998 | cadant | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1 | cadObjects | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1 | cadCable | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1.15 | cadSpectrum | CADANT-PRODUCTS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4998.1.1.15.2 | cadDownchannelMib | CADANT-CMTS-DOWNCHANNEL-MIB |
| 1.3.6.1.4.1.4998.1.1.15.2.1 | cadIfDownstreamChannelTable | CADANT-CMTS-DOWNCHANNEL-MIB |
| 1.3.6.1.4.1.4998.1.1.15.2.1.1 | cadIfDownstreamChannelEntry | CADANT-CMTS-DOWNCHANNEL-MIB |
| 1.3.6.1.4.1.4998.1.1.15.2.1.1.22 | cadIfDownChannelCACL2Threshold | CADANT-CMTS-DOWNCHANNEL-MIB |