All MIBs › Brcm-adapterInfo-MIB › ifState
ifState
Module: Brcm-adapterInfo-MIB
OID (symbolic): Brcm-adapterInfo-MIB::ifState
OID (numeric): 1.3.6.1.4.1.4413.1.3.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The operating mode of the driver, this information only applicable to the Broadcom adapter
What is ifState?
Reports the adapter driver's current operating mode: normal-mode, diagnostic-mode, adapter-removed, or lowpower-mode. An admin would check this if the adapter appears unresponsive, to see whether it's stuck in diagnostics or low-power state rather than simply down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.3.2.1.9 snmpwalk -v2c -c public <target> Brcm-adapterInfo-MIB::ifState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.3.2.1.9.1 snmpget -v2c -c public <target> Brcm-adapterInfo-MIB::ifState.1
Start monitoring Servers with Broadcom network interface cards (NICs) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Brcm-adapterInfo-MIB::ifState OID value, configure state conditions and alerts, and monitor any Servers with Broadcom network interface cards (NICs) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.3 | ifControllers | Brcm-adapterInfo-MIB |
| 1.3.6.1.4.1.4413.1.3.2 | ifTable | Brcm-adapterInfo-MIB |
| 1.3.6.1.4.1.4413.1.3.2.1 | ifEntry | Brcm-adapterInfo-MIB |
| 1.3.6.1.4.1.4413.1.3.2.1.9 | ifState | Brcm-adapterInfo-MIB |