BWA-DOT11-WLAN-MIB :: bwaVLRoamingOption

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBWA-DOT11-WLAN-MIBbwaVLRoamingOption

bwaVLRoamingOption

Module: BWA-DOT11-WLAN-MIB

OID (symbolic): BWA-DOT11-WLAN-MIB::bwaVLRoamingOption

OID (numeric): 1.3.6.1.4.1.12394.1.1.5.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Applicable to SU/RB only. Disable/enable the roaming feature. When enabled, the SU/RB will start scanning for an AU/BU after about one second of not receiving beacons or data from current AU/BU. Once it found a new AU/BU, it will also send through the wireless network a roaming SNAP on behalf of its clients informing other devices in the network of their new location. When disabled, it will wait for about seven seconds before starting scanning, and it will not send a roaming SNAP.

What is bwaVLRoamingOption?

On an SU or RB, enables or disables roaming: when enabled, the unit starts scanning for a new AU/BU after about one second of missing beacons/data from its current one and sends a roaming SNAP notification on behalf of its clients; when disabled, it waits about seven seconds before scanning and skips the roaming notification.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.5.9
snmpwalk -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLRoamingOption

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.5.9.1
snmpget -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLRoamingOption.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12394.1.1.5.9.1 i <value>

Start monitoring BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BWA-DOT11-WLAN-MIB::bwaVLRoamingOption OID value, configure state conditions and alerts, and monitor any BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12394alvarionALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1productsALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1breezeAccessVLMibALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.5brzaccVLBridgeParametersALVARION-DOT11-WLAN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12394.1.1.5.9bwaVLRoamingOptionBWA-DOT11-WLAN-MIB