BWA-DOT11-WLAN-MIB :: bwaVLMirUplink

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBWA-DOT11-WLAN-MIBbwaVLMirUplink

bwaVLMirUplink

Module: BWA-DOT11-WLAN-MIB

OID (symbolic): BWA-DOT11-WLAN-MIB::bwaVLMirUplink

OID (numeric): 1.3.6.1.4.1.12394.1.1.7.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Applicable to SU/RB only. The Maximum Information Rate (MIR) from SU/RB to AU/BU. MIR must be above bwaVLCirUplink value. Range for set: 128 to 2,048 (Kbps) for SU-3, 128 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 128 to 4,096 (Kbps) for SU-6 with SW version greater than 4.0, 128 to 14,976 (Kbps) for SU-24, 128 to 53,888 (Kbps) for SU-BD and SU-54, 128 to 6,912 (Kbps) for RB-14, 128 to 22,016 (Kbps) for RB-28, 128 to 107,904 (Kbps) for RB-100. 128 to 2,048 (Kbps) for SU-I. The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128).

What is bwaVLMirUplink?

This sets the Maximum Information Rate in Kbps for traffic from the SU/RB up to the AU/BU; it must stay above the corresponding bwaVLCirUplink value, with the allowed range varying by unit model (e.g. up to 107,904 Kbps for RB-100). Values entered are rounded to the nearest multiple of 128 Kbps.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.7.3
snmpwalk -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLMirUplink

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.7.3.1
snmpget -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLMirUplink.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12394.1.1.7.3.1 i <value>

Start monitoring BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BWA-DOT11-WLAN-MIB::bwaVLMirUplink OID value, configure state conditions and alerts, and monitor any BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12394alvarionALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1productsALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1breezeAccessVLMibALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.7brzaccVLServiceParametersALVARION-DOT11-WLAN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12394.1.1.7.3bwaVLMirUplinkBWA-DOT11-WLAN-MIB