All MIBs › BWA-DOT11-WLAN-MIB › bwaVLMirDownlink
bwaVLMirDownlink
Module: BWA-DOT11-WLAN-MIB
OID (symbolic): BWA-DOT11-WLAN-MIB::bwaVLMirDownlink
OID (numeric): 1.3.6.1.4.1.12394.1.1.7.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Applicable to SU/RB only. The Maximum Information Rate (MIR) from AU/BU to SU/RB. MIR must be above bwaVLCirDownlink value. Range for set: 128 to 2,048 (Kbps) for SU-3 with SW version below 4.0, 128 to 3,072 (Kbps) for SU-3 with SW version 4.0 and higher, 128 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 128 to 6,016 (Kbps) for SU-6 with SW version greater than 4.0, 128 to 14,976 (Kbps) for SU-24, 128 to 53,888 (Kbps) for SU-BD and SU-54, 128 to 6,912 (Kbps) for RB-14, 128 to 22,016 (Kbps) for RB-28, 128 to 107,904 (Kbps) for RB-100. 128 to 6,016 (Kbps) for SU-I. The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128).
What is bwaVLMirDownlink?
This sets the Maximum Information Rate in Kbps for traffic from the AU/BU down to the SU/RB; it must stay above the corresponding bwaVLCirDownlink value, and the allowed range (e.g. 128-53,888 Kbps for SU-BD/SU-54, 128-2,048 Kbps for SU-3 on older SW) varies by unit model. Values entered are rounded down to the nearest multiple of 128 Kbps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.7.2 snmpwalk -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLMirDownlink
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.7.2.1 snmpget -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLMirDownlink.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.12394.1.1.7.2.1 i <value>
Start monitoring BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BWA-DOT11-WLAN-MIB::bwaVLMirDownlink OID value, configure state conditions and alerts, and monitor any BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12394 | alvarion | ALVARION-DOT11-WLAN-MIB |
| 1.3.6.1.4.1.12394.1 | products | ALVARION-DOT11-WLAN-MIB |
| 1.3.6.1.4.1.12394.1.1 | breezeAccessVLMib | ALVARION-DOT11-WLAN-MIB |
| 1.3.6.1.4.1.12394.1.1.7 | brzaccVLServiceParameters | ALVARION-DOT11-WLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12394.1.1.7.2 | bwaVLMirDownlink | BWA-DOT11-WLAN-MIB |