BWA-DOT11-WLAN-MIB :: bwaVLMaximumCellRadius

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBWA-DOT11-WLAN-MIBbwaVLMaximumCellRadius

bwaVLMaximumCellRadius

Module: BWA-DOT11-WLAN-MIB

OID (symbolic): BWA-DOT11-WLAN-MIB::bwaVLMaximumCellRadius

OID (numeric): 1.3.6.1.4.1.12394.1.1.6.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Applicable to all units. For AU/BU: read-write. In units with SW version 2.0 and up - applicable only when the Cell Distance Mode is set to Manual. The highest distance from the AU/BU of any SU/RB served by it. Affects the maximum time the units wait for a response message and the slot size by taking into account the round trip propagation delay. For SU/RB: read-only. The distance is learned from the AU/BU. Range: For units below version 2.0 the range is 0 - 50000 Meters. Otherwise - the range is 0 to 54 Kilometers. 0 means no compensation (minimum slot size, maximal delay timeout).

What is bwaVLMaximumCellRadius?

On an AU/BU, sets the maximum distance to any served SU/RB, which affects the response timeout and slot sizing for round-trip propagation delay; on an SU/RB it is read-only and simply reflects the value learned from its AU/BU. A value of 0 means no distance compensation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.6.2
snmpwalk -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLMaximumCellRadius

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.6.2.1
snmpget -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLMaximumCellRadius.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12394.1.1.6.2.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> bwaVLMaximumCellRadius.1

Start monitoring BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BWA-DOT11-WLAN-MIB::bwaVLMaximumCellRadius OID value, configure state conditions and alerts, and monitor any BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12394alvarionALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1productsALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1breezeAccessVLMibALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.6brzaccVLAirInterfaceALVARION-DOT11-WLAN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12394.1.1.6.2bwaVLMaximumCellRadiusBWA-DOT11-WLAN-MIB