BWA-DOT11-WLAN-MIB :: bwaVLBurstModeOption

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBWA-DOT11-WLAN-MIBbwaVLBurstModeOption

bwaVLBurstModeOption

Module: BWA-DOT11-WLAN-MIB

OID (symbolic): BWA-DOT11-WLAN-MIB::bwaVLBurstModeOption

OID (numeric): 1.3.6.1.4.1.12394.1.1.10.10.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Applicable to all units. Applicable only if Burst Mode Option is supported by country specific parameters of the Sub Band. Not applicable if Wireless Link Prioritization is enabled. Enables/disable burst mode operation. In SU/RB with HW Revision B or lower blocked(3) value is returned when Security Mode is Wep , Data Encryption Option is Enabled and Burst option is Enabled. In AU/BU with HW Revision B or lower blocked(3) value is returned when Dfs Option is Enabled and Burst mode is enabled.

What is bwaVLBurstModeOption?

This enables or disables burst mode transmission; it only applies when the current sub-band's country parameters support burst mode and Wireless Link Prioritization is disabled. On HW revision B or lower units it can return blocked(3) automatically -- on SU/RB when WEP security plus data encryption are both enabled alongside burst mode, or on AU/BU when DFS and burst mode are both enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.10.10.1
snmpwalk -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLBurstModeOption

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.10.10.1.1
snmpget -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLBurstModeOption.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12394.1.1.10.10.1.1 i <value>

Start monitoring BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BWA-DOT11-WLAN-MIB::bwaVLBurstModeOption OID value, configure state conditions and alerts, and monitor any BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12394alvarionALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1productsALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1breezeAccessVLMibALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.10brzaccVLPerformanceParamsALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.10.10brzaccVLBurstModeALVARION-DOT11-WLAN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12394.1.1.10.10.1bwaVLBurstModeOptionBWA-DOT11-WLAN-MIB