BWA-DOT11-WLAN-MIB :: bwaVLAUDefinedFrequencyNew

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBWA-DOT11-WLAN-MIBbwaVLAUDefinedFrequencyNew

bwaVLAUDefinedFrequencyNew

Module: BWA-DOT11-WLAN-MIB

OID (symbolic): BWA-DOT11-WLAN-MIB::bwaVLAUDefinedFrequencyNew

OID (numeric): 1.3.6.1.4.1.12394.1.1.6.12.14

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Applicable to AU/BU. For 5.8GHz products with SW version below 2.0 this is the frequency in MHz of the AU/BU after the next reset. For units with SW version 2.0 and up this is the frequency in MHz to use when the DFS Option is disabled. (Replaces bwaVLAUDefinedFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher). For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.

What is bwaVLAUDefinedFrequencyNew?

This is the higher-resolution, read-write replacement for bwaVLAUDefinedFrequency, letting an admin set the AU/BU's target frequency in MHz (0.5 MHz precision) for use after reset or when DFS is disabled, on HW revision C and higher units.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.6.12.14
snmpwalk -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLAUDefinedFrequencyNew

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.6.12.14.1
snmpget -v2c -c public <target> BWA-DOT11-WLAN-MIB::bwaVLAUDefinedFrequencyNew.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12394.1.1.6.12.14.1 s <value>

Start monitoring BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BWA-DOT11-WLAN-MIB::bwaVLAUDefinedFrequencyNew OID value, configure state conditions and alerts, and monitor any BWA (early Alvarion) VL/4900/PtP wireless bridge or access units (legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12394alvarionALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1productsALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1breezeAccessVLMibALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.6brzaccVLAirInterfaceALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.6.12brzaccVLFrequencyDefinitionALVARION-DOT11-WLAN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12394.1.1.6.12.14bwaVLAUDefinedFrequencyNewBWA-DOT11-WLAN-MIB