BSUWIRELESSIF-MIB :: aniBsuWssRadioRegPowerLimit

MIB Reference — IPNetwork Monitor

All MIBsBSUWIRELESSIF-MIBaniBsuWssRadioRegPowerLimit

aniBsuWssRadioRegPowerLimit

Module: BSUWIRELESSIF-MIB

OID (symbolic): BSUWIRELESSIF-MIB::aniBsuWssRadioRegPowerLimit

OID (numeric): 1.3.6.1.4.1.4325.3.2.7.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description:

This parameter constraints the maximum power at which the radio for this WSS can transmit. It is equal to the EIRP (Effective Incidental Radiated Power) specified by the Regulatory Body.

Note: If you are using an older version of the Configuration Manager, this object is not defined in dBm. Instead, the following values will be displayed: nominal(1), one-level-above-nominal(2), two-levels-above-nominal(3), three-levels-above-nominal(4), one-level-below-nominal(5), two-levels-below-nominal(6)

What is aniBsuWssRadioRegPowerLimit?

Reports the regulatory maximum transmit power (EIRP) for the radio associated with a specific Wireless Service Set (WSS), as defined by the relevant regulatory authority. This caps the downlink transmit power for the BSU radio on that WSS.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.7.1.3
snmpwalk -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWssRadioRegPowerLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.7.1.3.1
snmpget -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWssRadioRegPowerLimit.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.4325aniANIROOT-MIB
1.3.6.1.4.1.4325.3bsuANIROOT-MIB
1.3.6.1.4.1.4325.3.2aniBsuWirelessIfANIROOT-MIB
1.3.6.1.4.1.4325.3.2.7aniBsuPowerControlTableBSUWIRELESSIF-MIB
1.3.6.1.4.1.4325.3.2.7.1aniBsuPowerControlEntryBSUWIRELESSIF-MIB
1.3.6.1.4.1.4325.3.2.7.1.3aniBsuWssRadioRegPowerLimitBSUWIRELESSIF-MIB