All MIBs › BSUWIRELESSIF-MIB › aniBsuWirelessPtPConfVerifyAllSu
aniBsuWirelessPtPConfVerifyAllSu
Module: BSUWIRELESSIF-MIB
OID (symbolic): BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfVerifyAllSu
OID (numeric): 1.3.6.1.4.1.4325.3.2.10.12
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirelessPtPConfTargetFrequency, aniBsuWirelessPtPConfBsuId are correctly configured on all the SUs connected. The values are compared against all the SUs connected to this BSU.
Sending a Get request on this object causes the agent to verify the above set of parameters. If these set of values are incorrect, an error string is returned indicating that some values are not in sync. If the current set of values are correct, then the string 'No error' is displayed.
This object might require upto 10 seconds to respond if multiple SUs are connected. Therefore, to ensure that it does not timeout before getting the complete results, the SNMP Manager tool should increase it's timeout value for this object to more than 10 seconds.
What is aniBsuWirelessPtPConfVerifyAllSu?
This object performs a validation check comparing the current point-to-point configuration parameters (channel width, target frequency, BSU ID) against all connected Subscriber Units (SUs). A query returns either a success message or an error string indicating which SUs have mismatched settings. Field technicians use this to quickly diagnose configuration synchronization problems in wireless point-to-point networks.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.10.12 snmpwalk -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfVerifyAllSu
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.10.12.1 snmpget -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfVerifyAllSu.1
Start monitoring Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfVerifyAllSu OID value, configure state conditions and alerts, and monitor any Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4325 | ani | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3 | bsu | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3.2 | aniBsuWirelessIf | ANIROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4325.3.2.10 | aniBsuWirelessPtPConfGroup | BSUWIRELESSIF-MIB |
| 1.3.6.1.4.1.4325.3.2.10.12 | aniBsuWirelessPtPConfVerifyAllSu | BSUWIRELESSIF-MIB |