The Target Frequency in MHz.

Its range depends on Channel Width.

1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center frequencies in this band are within 5250 + Half of Channel Width MHz and 5350 - Half of Channel Width MHz and can have any integer value (in MHz)

2) 5.8 GHz UNII Band (5725 - 5825 MHz). The center frequencies in this band are within 5725 + Half of Channel Width MHz and 5825 - Half of Channel Width MHz and can have any integer value (in MHz).

3) 5.8 GHz General (5650 - 5925 MHz). The center frequencies in this band are within 5650 + Half of Channel Width MHz and 5925 - Half of Channel Width MHz and can have any integer value (in MHz).

4) 2.6 GHz MMDS Band (2500 - 2689 MHz). The center frequencies in this band are 2503 + 6N MHz where N = 0,1,2,.,30

5) 2.6 GHz General (2500 - 2700 MHz). The center frequencies in this band are within 2500 + Half of Channel Width MHz and 2700 - Half of Channel Width MHz and can have any integer value (in MHz).

6) 3.5 GHz General (3300 - 3800 MHz). The center frequencies in this band are within 3300 + Half of Channel Width MHz and 3800 - Half of Channel Width MHz and can have any integer value (in MHz).

7) 3.5 GHz ETSI Band - 50 MHz duplexing Scheme (3410 - 3800 MHz).

8) 3.5 GHz ETSI Band - 100 MHz duplexing scheme (3410 - 3800 MHz).

10) 5.8 GHz ISM Band (5725 - 5850 MHz). The center frequencies in this band are within 5725 + Half of Channel Width MHz and 5850 - Half of Channel Width MHz and can have any integer value (in MHz).

11) 5.3 GHz General Band (5150 - 5350 MHz). The center frequencies in this band are within 5150 + Half of Channel Width MHz and 5350 - Half of Channel Width MHz and can have any integer value (in MHz)

Note: The term Half of Channel Width in all the descriptions above, is a rounded off value (with 0.5 rounded to 1).

Note: When this object is changed through SNMP agent, the value could take effect immediately depending on the current channel center frequency value. If aniBsuWirelessPtPConfTargetFrequency is modified, but the current aniBsuChannelFrequency value is still one of the entries in aniBsuWirelessFreqOperTable, then the target frequency will not take effect immediately. However it could take effect later on when the current frequency entry is deleted from the frequency table.