All MIBs › BSUWIRELESSIF-MIB › aniBsuWirelessPtPConfSwitchToFrequency
aniBsuWirelessPtPConfSwitchToFrequency
Module: BSUWIRELESSIF-MIB
OID (symbolic): BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfSwitchToFrequency
OID (numeric): 1.3.6.1.4.1.4325.3.2.10.13
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
The Frequency selected to be switched. This frequency should be either one of the frequency entries in the aniBsuWirelessFreqOperTable or the current target frequency aniBsuTargetFrequency.
A get request on this object will display the current frequency, aniBsuChannelFrequency and if no radio is detected, it will display 0.00.
What is aniBsuWirelessPtPConfSwitchToFrequency?
Specifies the target frequency to which the point-to-point wireless link should switch, either from the frequency operation table or the current target frequency. Reading this object returns the currently active channel frequency.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.10.13 snmpwalk -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfSwitchToFrequency
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.10.13.1 snmpget -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfSwitchToFrequency.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4325.3.2.10.13.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.4325 | ani | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3 | bsu | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3.2 | aniBsuWirelessIf | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3.2.10 | aniBsuWirelessPtPConfGroup | BSUWIRELESSIF-MIB |
| 1.3.6.1.4.1.4325.3.2.10.13 | aniBsuWirelessPtPConfSwitchToFrequency | BSUWIRELESSIF-MIB |