All MIBs › BSUWIRELESSIF-MIB › aniBsuWirelessPtPConfDSUSRatio
aniBsuWirelessPtPConfDSUSRatio
Module: BSUWIRELESSIF-MIB
OID (symbolic): BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfDSUSRatio
OID (numeric): 1.3.6.1.4.1.4325.3.2.10.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Downstream upstream ratio (DS/US ratio). This allows the user to configure how the total available bandwidth is split between downstream and upsteam.
ds70-us30 is 70/30 ds60-us40 is 60/40 ds50-us50 is 50/50 ds40-us60 is 40/60 ds30-us70 is 30/70
Also refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description.
Note: When this object is changed through SNMP agent, it is required to upload the configuration (set aniDevControlStartUpload in the device_control.mib to true) and then reboot the device for the changes to take effect.
What is aniBsuWirelessPtPConfDSUSRatio?
This object configures the ratio that splits total available bandwidth between downstream (toward subscribers) and upstream (toward backhaul) directions in a point-to-point wireless link. Common ratios include 70/30, 60/40, and 50/50 downstream/upstream splits. Wireless network operators adjust this ratio based on expected traffic patterns to optimize throughput for their specific applications.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.10.5 snmpwalk -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfDSUSRatio
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.10.5.1 snmpget -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfDSUSRatio.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4325.3.2.10.5.1 i <value>
Start monitoring Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfDSUSRatio OID value, configure state conditions and alerts, and monitor any Aperto Networks (Ceragon) PacketWave/WiMAX base station units (BSU) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4325 | ani | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3 | bsu | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3.2 | aniBsuWirelessIf | ANIROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4325.3.2.10 | aniBsuWirelessPtPConfGroup | BSUWIRELESSIF-MIB |
| 1.3.6.1.4.1.4325.3.2.10.5 | aniBsuWirelessPtPConfDSUSRatio | BSUWIRELESSIF-MIB |