All MIBs › BSUWIRELESSIF-MIB › aniBsuWirelessPtPConfCellRadius
aniBsuWirelessPtPConfCellRadius
Module: BSUWIRELESSIF-MIB
OID (symbolic): BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfCellRadius
OID (numeric): 1.3.6.1.4.1.4325.3.2.10.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The cell radius or link distance
Refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description.
Note: When this object is changed through SNMP agent, it is required to upload the configuration (set aniDevControlStartUpload in the device_control.mib to true) and then reboot the device for the changes to take effect.
What is aniBsuWirelessPtPConfCellRadius?
Represents the configured cell radius or link distance for the point-to-point wireless connection, which determines the maximum range of the link. This writable parameter must be uploaded to the device after changes to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.10.4 snmpwalk -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfCellRadius
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4325.3.2.10.4.1 snmpget -v2c -c public <target> BSUWIRELESSIF-MIB::aniBsuWirelessPtPConfCellRadius.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4325.3.2.10.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.4325 | ani | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3 | bsu | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3.2 | aniBsuWirelessIf | ANIROOT-MIB |
| 1.3.6.1.4.1.4325.3.2.10 | aniBsuWirelessPtPConfGroup | BSUWIRELESSIF-MIB |
| 1.3.6.1.4.1.4325.3.2.10.4 | aniBsuWirelessPtPConfCellRadius | BSUWIRELESSIF-MIB |